MidNite 600VDC Shut off Box Receiver

MidNite Solar 600VDC Shut off Box Receiver

$115.28

The Midnite Solar Shut Off Box is a simple-to-install, low-cost, Rapid Shutdown System solution – designed to comply with NEC 2014 and NEC 2017.

Description

The system uses a receiver at the module that wires in, just like an optimizer, and a transmitter that is installed in or near the inverter.  The installer does not need to install any other wiring between the transmitter and receiver.  The system is fail safe.  If the receiver does not sense the signal from the transmitter, it turns off and opens up the circuit.

Features

  • Receiver is fail safe, if PLC signal goes away- the SOB turns off the string
  • A receiver is placed at the end of each string – up to six strings
  • A transmitter is placed inside a grid tie inverter wiring compartment
  • The PV positive wire runs through the transmitter core to induce a signal in the PV wire
  • Transmitters requires 12-16 VDC to power supply
  • Module level shut down can be achieved by installing one receiver per panel
  • Available for 600V or 1000V string voltage
  • 80V maximum panel voltage
  • 12A maximum string current
  • Operating temperature range: – 40ºC to +80ºC

Owner's Manual

Midnite Solar Shut Off Box Manual

Midnite Solar Shut Off Box Brochure